How to Replace a HP DV5 Fan?
Page 1 of 1
How to Replace a HP DV5 Fan?
Feature for hp pavilion dv5 series CPU cooling fan:
Specification: Brand New HP Pavilion DV5 CPU Cooling FAN
Type: Laptop CPU Fan
Condition: Brand New
Warranty: 3 Months
Input: DC5V
Output: 0.3A
How to Replace a HP DV5 Fan?
1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.
2. Turn off the laptop and unplug it. Remove the main battery, CD/DVD drive and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive sled.
3. Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.
4. Remove the screws that hold the keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.
5. Unplug the HP DV5 Fan Cooling Fan. Remove the screws that hold the heat sink and hp laptop fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.
6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the HP DV5 Fan back in, then reassemble the laptop.
7. Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new fan running and feel warm air blowing from the vent on the side of the laptop. A HP DV5 Fan does not run continuously, so don't be concerned if the HP DV5 Fan shuts off periodically.
Specification: Brand New HP Pavilion DV5 CPU Cooling FAN
Type: Laptop CPU Fan
Condition: Brand New
Warranty: 3 Months
Input: DC5V
Output: 0.3A
How to Replace a HP DV5 Fan?
1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.
2. Turn off the laptop and unplug it. Remove the main battery, CD/DVD drive and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive sled.
3. Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.
4. Remove the screws that hold the keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.
5. Unplug the HP DV5 Fan Cooling Fan. Remove the screws that hold the heat sink and hp laptop fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.
6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the HP DV5 Fan back in, then reassemble the laptop.
7. Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new fan running and feel warm air blowing from the vent on the side of the laptop. A HP DV5 Fan does not run continuously, so don't be concerned if the HP DV5 Fan shuts off periodically.
laptopreviewsuk- Posts : 7
Join date : 2012-07-21
Similar topics
» How do I replace my laptop keyboard?
» How to Replace Gateway laptop keyboard?
» Replace the SONY KFRSBA019A Keyboard is easy
» New tips, replace Dell Inspiron B130 keyboard key
» How to Replace Gateway laptop keyboard?
» Replace the SONY KFRSBA019A Keyboard is easy
» New tips, replace Dell Inspiron B130 keyboard key
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|